Ice Makers
Equipment designed to make aqueous and dry ice; products may be handheld, benchtop, or floor models. Includes water filters and filtration systems for ice makers.
Ice makers are used to produce ice from water or “dry ice” from liquid nitrogen. Most laboratories have access to an ice machine, since ice is used to keep samples and reagents cold during experiments or other lab work.
Ice makers are typically large floor-model units that are plumbed directly to a water source. However, smaller capacity benchtop and undercounter units are also available. Ice makers may contain replaceable air and water filters or cartridges and may have antimicrobial features that help to maintain water and ice quality.
Ice makers vary in size based on the amount of ice they can produce and store. They also vary based on the type or shape of ice produced, including:
- Cubes
- Flakes
- Nuggets/pearl-shaped
Some ice makers dispense water and ice; others have large covered bins from which one must scoop or otherwise transfer the ice into a secondary container.
Ice-making may be continuous until a certain threshold is reached, while other ice makers can be programmed to meet fluctuating demands and high- and low-use periods. Most ice makers run on a regular current, much like refrigerators or freezers. They usually vent toward the front, which allows them to be placed in smaller or enclosed areas.
Laboratory dry ice makers, produce small quantities of dry ice, usually about a 16 oz. (454 g) block at a time. One block typically takes less than five minutes to form. Production requires a tank of liquid carbon dioxide with a dip tube; a 50-pound tank can produce anywhere from eight to 16 blocks of dry ice. Other versions that produce dry ice as flakes or “snow” are also available.
Electron Microscopy Sciences MAC Auger Mineral Standards Block with 28 Elements 35mm 32mm
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Size: 32 mm
Electron Microscopy Sciences MAC Multi Element Block with 45 Auger Standards
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Electron Microscopy Sciences MAC Set Of SRM 1872with Set Of 3 Auger Standards
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Electron Microscopy Sciences MAC 28 Auger Mineral Standards Block, 25 mm
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Size: 25 mm
Electron Microscopy Sciences MAC SRM 482 Au/Cu Auger Standards
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Electron Microscopy Sciences MAC 18 Auger Standards Biological Block, 32 mm
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Size: 32 mm
Electron Microscopy Sciences MAC Multi Element Block with 35 Auger Standards
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Electron Microscopy Sciences MAC 18 Rare Earth Auger Standards Block, 32 mm
MAC has developed multi-element blocks of reference materials suitable for the compilation of a reference library of Auger sensitivity factors when used with the Auger Electron Microscopy (AES). A carefully selected range of elements or compounds will enable the surface analyst to compile a valuable reference library of spectra. A Faraday Cup, for the accurate measurement of specimen current, is available as an option.
Multi-element blocks containing up to 50 reference materials can be made to suit the configuration of the most instrument. The reference material each has an exposed area about 2 square mm and are polished to a 1/4 micron diamond finish. The block of reference material is made from AISI 304 grade austenitic.
All blocks are supplied with certificates of analysis.
Size: 32 mm
Research Products International Corp Magic Touch 2 Ice Pan, 4 L, Green
Chilling Has Never Been So Good! Superior insulating properties combined with high chemical resistance make Magic Touch 2 Ice Pans compatible not only with wet ice, but also with ultra-low temperature materials including dry ice, salt slurries, dry ice solvent slurries, or liquid nitrogen. Able to withstand a wide temperature range of -196°:C to 100°C, these high-quality, expanded urethane, laboratory ice pans are lightweight, durable, non-sweating and impervious to moisture and odors. They feature a convenient pour spout, drip-proof rims, a fill line indicator, and a snug-fitting, keyed lid and base for easy stacking. Their lightly textured, non-slip finish and raised edge provides secure transport and a stylish look.
Enterprise Technology Solutions Index Maker Dividers
Print and Apply Index Maker Clear Label Unpunched Dividers 3-Tab 11 x 8 5 White 25 Sets
MSC KaiVac Cleaning Machine, 17.4 gal Solution Tank, 500 PSI
This mid-size no-touch cleaning machine is designed for hygienic cleaning of various surfaces. It applies an automatically diluted cleaning solution, blasts surfaces and floors with an indoor pressure washer, then vacuums the floor dry, removing soils, moisture, and contaminants and leaving surfaces virtually dry and soil-free.
- Patented no-touch cleaning process for hygienic cleaning.
- Automatically diluted cleaning solution applied by an indoor pressure washer.
- Removes soils and contaminants, leaving floors virtually dry.
- Equipped with a 17.4 gal solution tank and an 18.1 gal vacuum tank.
- Features a powerful 500 psi pump system.
- Removable engine compartment with black box technology.
- HEPA filtered exhaust and 300 mph HEPA blow feature.
- Operates on 110 volt - 60 Hz with a 50 ft GFCI electric cord.